The AXIS Foils S-Series is by far the best performer on the market today. The engineering, the stiffness on each connection point and the strength of the design, outperforms any other surf/sup/downwind/pump/wake/wind/kite foil on the market. The S-Series front wings, rear wings and components are interchangeable. You can keep on adding different size masts, front wings, rear wings or fuselages as your style and skill level evolve. The modularity of the design, stiffness of each component and overall engineering make the AXIS S-Series the ultimate foil for any style of riding.
S-Series 1020mm Carbon Front Wing
AXIS S-Series 1020mm Carbon Front wing is perfect for your surf, sup, pump, downwind or wake foiling sessions. Compatible with AXIS S-Series fuselage. This is a huge wing designed to catch the smallest little bumps out there. And when it comes to flat water pumping and dock starts, the 1020 dominates.
Graphics on the wings give you all possible measurements so you can best compare and also quickly swap pieces or get new accessories for your foil.
1020mm Carbon Wing
ACTUAL AREA: 2051 square cm / 318 square inches
SPAN: 102 cm / 40 inches
PROJECTED AREA: 2013 square cm / 312 square inches
VOLUME: 4161 cubic cm / 254 cubic inches
S Series 75cm Foil Mast 19mm
Designed for the AXIS S-Series and K-Series Foils the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2019 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our K/Series masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It’s even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing.
S-Series Standard Fuselage
The AXIS S-Series Standard Fuselage is a 3D CNC cut anodized aluminium fuselage, length is 76.5cm long.
Incredibly strong connection to any size wings to create a very direct feel from your feet to the front wing, which is the most important part of surf foiling.
S-Series Carbon Rear Wing 440mm
The AXIS S-Series Carbon Rear Wing 440mm (wingspan) is the allround rear wing that does everything well. It feels looser than the 500mm rear wing, it’s playful and overall high performing.
When you purchase the AXIS S-Series 440mm carbon rear wing we include an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage.
S-Series Foil Base Plate 19mm
The AXIS Foil Plate mount is made with high grade Aluminium, 3d CNCed and anodized. This is not your off the shelf plate mount. This is a beautifully engineered and very stiff piece, designed to hold the mast of your foil tightly and strongly. Multiple holes give you flexibility with positioning on your foil board. And the sliding endings, let you remove the plate by just loosening the screws, w/out having to fully unscrew the M8 bolts from your board.
Doodad – Mast to Fuselage Adapter 19mm
Used to connect your 19mm Mast to your Fuselage. AKA “Doodad”
Full Screws and Tool Set for S-Series Hydrofoil
he following are included in our S-Series Screw & Key Set:
- 2 x M8*35 Countersunk 316 grade Torx drive Stainless Steel screws
- 2 x M8*70 Countersunk 316 grade Torx drive Stainless Steel screws
- Torx Key for M8
- Torx Key for M6
- 2 x M6*25 Countersunk 316 grade Torx drive Stainless Steel screws
- 4 x mast track sliders
- 8 x M8 x 25 Countersunk 316 grade Torx drive Stainless Steel screws
- 4 x M8 x 20 Countersunk 316 grade Torx drive Stainless Steel screws